(6) Simulation chart
Digital force gauges do not support analog charts;
After configuring the relevant parameters of the traditional 6218/6225 force measuring table, check "Analog access" to connect the lens to play, and make the force measuring table stressed. Click the "View Type" button on the upper left of the software, select "Analog chart" from the pop-up menu, right-click on the chart and select Edit page...The Visble Channels window will pop up, and the configuration of all Channels when adding the force measuring table will be displayed in the Visble Channels window. Click show in the window to check/uncheck the channels, and after checking AutoScale, the data curve in the chart will change with the change of the force and moment of the force measuring table.After the channel is unchecked, the force and torque data of the channel will not be displayed.
The simulation chart can display the data of force and moment in real time mode, and also record the data containing force and moment after post-processing loading, select the simulation chart to display the data information of output and moment;
By default, the number of Channels to be added in the Visble Channels window is up to 6. If you want to add more channels, double-click MaxRows and enter the total number of channels to be selected (see Figure 176).Double-click the input box to the right of PageTitle to modify the simulated chart name (Figure 177).Double-click the input box on the right of LineWidth to increase/decrease the line thickness in the simulation chart after entering a value in the input box;
Right-click Add Page on the chart to add a simulated chart (Figure 178).If multiple simulated charts need to be deleted, select the chart to be deleted first and right-click Remove Page on the chart to delete the simulated chart (see Figure 179). At least one simulated chart must exist, that is, the last simulated chart cannot be deleted using the Remove Page function.
Last updated
