(7) Import and export of force table files
To load the data including the simulation channel of the force measuring table in the post-processing mode, click the File button at the lower right corner of the software, and click the Export Forces File button to directly export the force file to the working path of the software.In real-time mode, the button is gray and cannot be clicked.
Export of c3d File: Load the recorded force table data in post-processing, click the file button at the lower right corner of the software, and click "Export c3d file". The exported c3d file will contain the data of the force table and analog channel. If one or more Markersets exist in the 3D view, you can choose to export the data of one or more Markersets on the left side of the popup window, while the export on the right side of the popup window is not named as gray and cannot be checked (see Figure 180). You can save the exported folder by changing its name. If no data is loaded, the "Export c3d file" button is gray and cannot be clicked.
Click "Import c3d file" and select the c3d file in the folder. When the c3d file has an analog channel, it will be prompted to configure the channel range (as shown in Figure 181). If the c3d file contains the data of the measuring table and the channel, the parameters of the measuring table and the analog channel will be normally displayed in the 3D view after import; if the c3d file contains Markerset, the parameters of the measuring table and the analog channel will be displayed normally in the 3D view.The named point to which the Markerset belongs is also correctly displayed in the 3D view.
ANC file export.After loading the data of the force measuring table in post-processing, click File in the lower right corner of the software and click "Export ANC file", a file with suffix.ANC will be generated in the working path of the software. The generated anc file can be opened in notepad, and the specific values of force and moment in the file can be seen after opening.
Last updated
