(3) Create a Markerset (Body)

Make sure the dongle is plugged into the operating computer.XINGYING software supports the creation of human bodies in real time, requiring models to wear motion capture suits and properly attach reflective marks. In the 3D view of the software, you can see every reflective mark and there are no other stray points in the site. For the creation of human bodies with 53 stickers, please make sure that the number in the lower left corner of the 3D view is 53 (as shown in Figure 56).Stick points according to the map and video guide (if you have difficulty or other problems, please contact technical engineers);

Figure 56

Confirm that the software is in the playing state. Click the "Freeze Frame" button at the top of the software interface to freeze the 3D view. After the 3D view is successfully frozen, the button will display "Unfreeze"; The model stands in TPOSE. When the calibration file is Y axis up, face the Z axis (Y negative axis when Z axis up), and the arm is parallel to the X axis. Click freeze frame, right-click on the 3D interface and select "Create Body", and select the pose to be created in the drop-down box of "Model Creation" window (as shown in Figure 57).Baseline+Toe,Headband(53) indicates the human body posture of 53 Baseline. Place the mouse cursor on the baseline picture and roll the mouse wheel to view the baseline position from different angles. After verifying that the baseline is consistent with the baseline picture, click "Create".

Figure 57

Create a 53-point mannequin (see Figure 58). In real-time mode, the "Reset IDs" button can re-identify the mannequin (see Figure 59);

Figure 58

Figure 59

If multiple human body templates are created, it is necessary to create one human body template, the model completely walks out of the field, and another model enters the field again. Make sure that there are only 53 Marker points on the human body in the 3D view, and repeat the above steps. Multiple people can also stand in T-Pose in the capture field at the same time to create the human body by selecting Marker points.

Click the "Unfreeze" button to unfreeze the 3D view. When the model moves arbitrarily, you can see that Markerset will follow the model's activities in real time, and you can also directly collect data under this state.