(11) Real-time application of MarkerSet

The software supports real-time display of Markersets, i.e., markers and wires with defined names, in real-time mode, usually used in conjunction with the SDK;

The Markerset file needs to be created in post-processing mode, or the Markerset needs to be created in real time through the "freeze frame" function;

In real-time mode, ensure that the calibration profile is loaded and the lens is connected;

Make the player in the suspended state, click the "Add/remove" button at the top of the software interface, check the saved Markerset file in the pop-up window, and close the small window (see Figure 132);

If the Markerset file is loaded before the real-time mode is switched to the post-processing mode, there is no need to manually load the Markerset file when switching to the post-processing mode and then to the real-time mode. The XINGYING software will automatically load the Markerset file that was loaded in the last real-time mode.After the XINGYING software is shut down and started again, the software will also automatically load the Markerset file that was loaded in real time before the last shutdown;

Figure 132

Click the Play button to see the data effect with Markerset in real-time 3D view; Data can also be collected in this state and entered into post-processing for analysis.