(8) Create a custom template (post-processing)

In the post-processing mode, you can manually create a human or rigid template, and after the template created by post-processing and data recovery, you can load the template in real-time mode and apply it to other data.

To Create a custom template, first record a group of unnamed point data in real-time mode, and then load the recorded unnamed point data in post-processing. Take the human Body template as an example, create a new Markerset, select the body type, and click Create to create the human body template.

Next, create the point name of the human body, and use Quick Id to manually identify the unnamed point. If the point is identified incorrectly during the process of identifying the unnamed point, the incorrectly identified named point should be identified correctly. After the identification is correct, click template establishment, check "take the current frame as the template", click OK, and save the model. After identifying all unnamed points correctly, establish a Link connection and create the bone name, enter the Model Pose mode to adjust the bone to the ideal position, modify the bone position or other parameters in the Model Pose mode, you need to exit Model Pose and click to solve.The modified bone parameters will take effect in 3D view;

At this time, only the points on the first frame of the data are identified correctly. We click Track recognition to make the points on all frames recognized, and then click Solve to identify the points on all frames of the data, the lines and the bones created by them.

Next, we will repair the data of the template we created. For specific operations, please refer to the above "VIII. Data Processing → (VI) Template establishment".Note: When using the template creation function, you need to select "Use the current frame as template" for template creation only when the Marker that identifies the error is correctly identified in the new template. When repairing existing data, do not select Use the current frame as template in the template creation window.After the data repair is completed, click Save model, and then you can load the template we just created in real-time mode.