No calibration (anchor calibration)
Before using this function, please perform a basic calibration of the entire system. After the calibration is completed, place a Marker point in the 3D view to create the aiming point；
Create anchor: Please place Marker points around the edge of the captured scene, ensuring that the position of the placed Marker point is at the edge of the captured scene and that the placed Marker point can be reconstructed in the 3D view. Next, click on the freeze frame to freeze the 3D view, right-click and select "Create Anchor". After the anchor is created, the Marker in the 3D view will change from white to red；
If you want to delete an anchor point, you need to pause the software playback, open the calibration panel, click the gear button on the right side of the panel to open the calibration settings, select no calibration, and click the "Delete Anchor Point" button to delete the anchor point ；
After creating the anchor point, open the calibration panel, click the gear button on the right side of the panel to open the calibration settings, select "calibration free", and click the "use calibration free" button. The software will update the calibration every hour, and the calibration file in the work path will also be updated. The "calibration free" interface will display the latest update time.
After successfully creating anchor points, please do not arbitrarily change the position of the anchor points to ensure that the anchor points created in the 3D view during the calibration free period are correctly recognized；
Last updated
