Power on the switch. Insert one end of the network cable into the network port of the switch, and insert the other end into the network port of the camera's tail cable. Observe that the camera's digital tube lights up, which means the camera is powered on successfully.
Insert the RCA cable into the synchronous input port, connect the other end to the synchronous box using an adapter cable, and then use a network cable to connect the synchronous box to the switch.
Connect the computer to the switch using a network cable. Open the software, click on the third - party device, select the network camera configuration, click "Add", enter the name, IP address, account and password, and then close the network camera configuration.
Connect the lens, click on "Settings", select "Synchronization Box Settings", choose the device, select "Internal Clock" as the input source, check the output port corresponding to the hardware device for output. After the software starts playing, open the reference video, and you can see the video image.
