Place the L-shaped rod in the visible area of the camera, open the reference video view, click View--Reference Video Calibration, select "L Calibration", click the "Freeze Frame" button at the bottom of the calibration panel. Next, click on the four Marker balls on the L-shaped rod in the reference video view of each AI camera. After completion, click the "Add Frame" button. At this time, a prompt "L Calibration Successful" will be printed in the calibration record.
In the reference video calibration panel, the calibration type will automatically select "T Calibration". Enter the length of the T-shaped rod used for calibration in the rod length input box.
Click the "Start Calibration" button. The calibrator holds the T-shaped rod, stands still at a selected position, and clicks the "Freeze Frame" button. Then, click the three Marker balls on the T-shaped rod in the reference video view of each AI camera. After that, click the "Add Frame" button. After adding a frame of calibration data, the calibrator adjusts the position again and repeats the above operations to add sample frames until the calibration result is obtained. It is recommended that the calibration result be "Good" or above. If the result is "Poor", we suggest you recalibrate. During the calibration process, the current calibration status and the number of added sample frames will be printed on the panel.
Switch the view to the 3D view. Have the model stand within the visible area of the AI camera. Then, 22 Marker points of the Markerless human body will be displayed on the 3D view. At this point, you can create a Markerless human body and start using the software.
