Skip to main content

1. Device Properties

Motion Capture Camera​

  1. Connect the cameras, then click on the device icon at the top of the software to view each camera's device properties (6.1.1).
  2. Serial Number: After connecting the cameras, they will be listed under the motion capture camera section. Clicking on a specific serial number will display information for that camera alone in the 2D view.
  3. IP: Displays the IP address of the camera in the field, corresponding to the digital display below the camera.
  4. Type: Displays the model of the camera in this view.
  5. Status: Indicates the status of the camera. There are three states: online, frame drop, and offline.

Properties​

  1. Advanced: When the camera is connected, adjusting the exposure will result in observable changes in the 2D view. For instance, using a larger value like 1/60 will result in more black shadows. The actual frame rate of the recorded file will be the same as the set frame rate.
  2. Maximum/Minimum Threshold Pixels: Setting the 'Maximum/Minimum Point Diameter' can filter the diameter range of ' markers' in the 2D view.