Skip to main content

1. Network Camera Networking

  1. Network cameras are powered via Ethernet cables. The camera focal length has been calibrated, and the camera IP and program version have been correctly set at the factory, requiring no modification.
  2. Power on the switch, insert one end of an Ethernet cable into the switch, and the other end into the network port of the camera's tail cable. When the camera's digital tube lights up, it indicates that the camera has been successfully powered on.
  3. Connect the computer to the switch using an Ethernet cable. Open the software, click on "Third - party Devices", select "Network Camera Configuration", click "Add", enter the name, IP address, account and password. Then close the Network Camera Configuration and open the reference video, and you can view the video footage.
5c79a0a053ee0747478e52199344efab_compress
企业微信截图_17491740505679