In view of the situation where a small number of cameras are accidentally touched or the position is greatly shifted, resulting in poor capture effect, without updating the calibration of all cameras, 1 ~(N-2) cameras can be individually selected for T calibration;
Partial calibration only performs T calibration and does not require L calibration;
Before partial calibration, you need to set the T calibration parameters and check the camera to be calibrated. After the settings are completed, click "Partial Calibration" to start the T swing process(8.5.1);
After wanding, click the 'Calculate' button to compute the calibration results. If the results are not as expected, exclude abnormal factors and click 'Previous Step' to continue T-calibration;
After calibration, save the calibration file, switch to the 3D view, and confirm if the capture results have been optimized.
Click on Split-Screen, choose the 2D view with the 3D view, double-click a specific lens in the 2D view, causing the lens in the 3D view to change color and switch to the second angle of that lens. You can also click on the lens list in the device section.
