7. Calibration-free (Anchor Calibration)
Before using this function, please perform a basic calibration of the entire system. After the calibration is completed, place a Marker point in the 3D view to create the aiming point;
Last updated
Before using this function, please perform a basic calibration of the entire system. After the calibration is completed, place a Marker point in the 3D view to create the aiming point;
Last updated
Please place Marker points around the edge of the capture scene, ensuring that they are positioned at the scene's boundary and can be reconstructed in the 3D view. Next, click "Freeze Frame" to freeze the 3D view. Select the Marker points where you want to create anchor points, right-click, and choose "Create Anchor" Once the anchor points are created, the Markers in the 3D view will change from white to red.
First, pause the software playback, open the calibration panel, click on the gear button on the right side of the panel to open the calibration settings, select "Calibration-Free," and then click on the "Delete Anchor Point" button. After clicking, the anchor point will be deleted (8.7.1).|\
After creating anchor points, open the calibration panel. In the panel, click the gear button on the right to open the calibration settings, select "Calibration-Free," and check the "Use Calibration-Free" checkbox. Once enabled, the software will perform calibration every hour (version 8.7.2). Alternatively, you can manually trigger calibration by clicking the "Refresh" button. After calibration is completed, the currently loaded calibration file will be automatically updated, and the "Calibration-Free" interface will display the most recent update time.
After creating an anchor marker, if you need to add more anchor markers on top of the existing number of anchor markers, first click the "Freeze Frame" button, box select the unnamed marker where you want to add an anchor marker, right-click and select "Add Anchor" . Then a prompt window will pop up on the software. After clicking "OK," the specified unnamed marker will become an anchor marker and will be displayed in the 3D view(8.7.3);\
