(4) Create Markerset (VR Body)
XINGYING software supports the creation of 8-body and 9-body VR bodies in real time.The model is required to wear a rigid Rig plate with a reflective marker. The VR Body (9) is to wear a rigid Rig plate on the back of the model's hands, the outside of the upper arms of the hands, the back of the waist, the front of the chest, the top of the head, and the instep of both feet respectively, and tighten the Rig plate to prevent the model from moving the rig plate during movement after the creation of the human body.Each reflective marking point can be seen in the 3D view in the software and there are no other stray points in the site. To create the VR Body, please make sure that the number in the lower left corner of the 3D view is the total number of reflective marking points on each Rig board, and the reflective marking points on each Rig board shall not be less than three (as shown in Figure 60). If it is difficult to attach points or have other problems, please contact technical engineers.
Confirm that the software is in the playing state. Click the "Freeze Frame" button at the top of the software interface to freeze the 3D view. After the 3D view is successfully frozen, the button will display "Unfreeze";When the calibration file is Y axis up, the model is facing Z axis (Y negative axis when Z axis up), and the arm is parallel to the X axis. Click freeze frame, right-click on the 3D interface and select "Create Body", and select "VR Body" from the drop-down box of the "Model Creation" window (as shown in Figure 61).
Create a mannequin for VR Body (9) (Figure 62).Create a VR Body (8) Human body model, please wear a rigid Rig plate with reflective markers on the back of both hands, the outside of both arms, the back of the waist, the top of the head, and the instep of both feet to create the human body;
Last updated
