(3) 3D and rigid body recognition threshold

Select the "System" TAB in the Settings, and check the "3D recognition threshold" function (as shown in Figure 97). The default value is 6mm, and the parameter value of the 3D recognition threshold should be no less than 6mm. If it is less than 6, the internal lens of the software cannot see the same mark reflection spot, which may cause the internal point of the 3D view to split.Check the "rigid body recognition threshold" function, the default value is 8mm (Figure 97).The recognition threshold of 3D and rigid body can be adjusted when there are stray points or point splitting in 3D view.(Do not manually modify this parameter unless necessary. Consult technical support engineers for guidance before modifying this parameter.)

Figure 97