(1) Analysis chart (point, line, Angle data)
Click the option "Window split - 2 Windows: Up/down" at the top of the interface, so that the main interface is divided into two upper and lower panes, and there will be a red border when the pane is selected. Click "View Type" at this time, and let one window display "3D view" and the other window select "Analysis Chart" (as shown in Figure 133);
In real-time mode, the maximum and minimum values of X, Y, and Z will be displayed on the left side of the analysis chart, and the values in the middle of X, Y, and Z represent the data of the current frame (Figure 134).
The pop-up analysis window has three labels, among which "position/speed/acceleration" means to analyze the position (coordinates), speed and acceleration of the Marker. If "speed" is selected and any Marker is clicked, the speed of the point in each direction at different times can be displayed on the chart (see Figure 135).
"Spacing" represents the calculation and analysis of the linear distance between two Marker points. Click "First Marker" to select Marker in the 3D interface, and then click "Second Marker" to select another Marker in the 3D interface.Data and curves are also displayed on the chart (Figure 136);
"Angle" represents the Angle between the lines connected by multiple markers. Similarly, when Marker is selected in "From" and "To", the Angle change of the Angle between the two groups of "from-to" lines will be displayed on the chart (Figure 137).
Post-processing mode Under each TAB, click "Export.ly File..."Button for data export (see Figure 138). The exported.ly file can be opened with Notepad or Excel, and can only be opened by dragging the file into Excel window when using Excel (see Figure 139).
When analyzing the chart in the post-processing mode, after the data curve is displayed, hover the mouse over the position of the number of frames to be viewed, and slide the mouse wheel to enlarge the chart curve. When it is enlarged to 20 frames or less, the identification and detailed data will be displayed in the chart (see Figure 140).
In the analysis chart, you can drag the data left and right by holding down the left key. After selecting a Marker, you can use the shortcut keys of the up and down keys on the keyboard to select the Marker name on the right.
The rigid or human data recorded in real-time mode can be obtained after post-processing by exporting HTR file and BVH file. In the HTR export option, the rotation order of Euler Angle on the left side is gray by default. On the right side, you can select Export nobase or currentframe, but not at the same time.Click OK to export the HTR file (Figure 141).BVH files can be exported with one click (Figure 142).
Last updated
