(1) Smoothing and stabilization
Open the Settings, select the "System" TAB, 3D smoothing function (as shown in Figure 88), you can select "one, two, three, four" four smoothing levels, select one of the smoothing levels, open the XYZ chart, and select a point of Markerset under real-time.You can make the coordinate curve of that point fluctuate less than it would without 3D smoothing."The Carl Smooth function is enabled by default.
Select Eliminate Jitter to eliminate jitter of all rigid bodies and points in the 3D view, as shown in Figure 89.; The smooth anti-shake function is not required in all scenarios. In special scenarios, when points or rigid bodies in the 3D view jitter amplitude is large or jitter reduction is required to meet the requirements, you can select the above functions accordingly (do not set this parameter if it is not necessary, and contact technical engineers before setting this parameter).For example, when using the VR scene, we can use the 3D smoothing and Kalman smoothing functions to smooth the rigid body in our 3D view, so that the jitter in the VR scene is smaller;
Last updated
